User's Manual

12
TROUBLE SHOOTINGTROUBLE SHOOTING
Buzzer alarm doesn’t work?
Buzzer alarm can’t turn it off ?
Receiver Doesn’t work with computer?
Receiver connect to TV don’t work?
Camera doesn’t work?
TV monitor doesn’t show camera video?
1. Make sure the receiver and camera are power on.
2. Make sure the PIR cable is plugged into PIR port
3. Check the alarm setting of receiver is in “STB” or “ON”.
4. Check the receiver is paired with camera already.
5. Check the receiver is switched to Buzzer on.
1. Buzzer keep alarming If the camera is still triggering.
1. Make sure the receiver and camera are power on.
2. Check the alarm setting of receiver is in “STB” or “ON”.
3. Check the receiver is paired with camera already.
4. Check the USB cable is plugged to the computer.
(or unplug other device, only plug the receiver and try again. sometimes
USB cable don’t work cause the computer USB port power was shared to
another device)
5. Make sure the software has installed already.
1. Make sure the receiver、 camera and TV are power on.
2. Check the alarm setting of receiver is in “STB” or “ON”.
3. Check the receiver is paired with camera already.
4. Check the RCA cable is plugged to the TV already. and press the
A/V button on controller to switch to camera video.
1. Make sure the camera are power on.
2. Make sure the PIR cable is plugged into PIR port
3. Check the power switch is “ON”.
1. Make sure the receiver and camera are power on.
2. Make sure the PIR cable is plugged into PIR port
3. Check the alarm setting of receiver is in “STB” or “ON”.
4. Check the receiver is paired with camera already.