User's Manual

http://n.yam.com/tlt/life/201105/20110513823719.html
Full power
Run out power
Empty power
The power indication is Black.
The power indication turns into Black Red once.
The power light flash in Green Red once.
The power indication turns into Black Red until baby monitor off.
The power light flash in Green Red until baby monitor off.
Black Red
PARENT UNIT
06
25℃Zoom
Battery Status
(PU Side)
Battery Status
(BU Side)
Panel active
area
Count Down
Timer
Volume display
(BU)
Volume setting
(PU)
RF Quality
Temperature
(BU Side)
2010/07/20
10:26
Date
Zoom Icon
Time
PU Monitor Introduction
Battery Status
Date
Temperature
RF Quality
Panel Active Area
Volume Display(BU)
Volume Setting(PU)
Zoom
Time
Count Down Timer
When the power is low, it will flash.(refer to as follows form)
Show the date. (please go to the menu to set up the correct date.)
Open the Temp alarm. When the temperature is out of range, the icon flash in red and beep.
When the RF signal is weak, the icon will flash in red ( ), and beep.
Show the Menu setting and BU video, start VOX Mode then it goes to Sleeping Mode.
Show the volume level of BU.
Press the vol+ or vol- button to adjust the volume of PU.
Press the hot key Zoom in to twice, and it shows the red icon, press again then invisible.
Show the real time (please go to the menu to set up the correct date.)
Menu-> Alarm Setting->Count Down-> ->set hour->
The icon keeps flashing in red and beeps when time is up.
(press any key to stop the alarm)
EX: Menu-> Alarm Setting->Count Down-> -> The icon will disappear.
Power indication