Operation Manual

16
Advanced options overview
The figure below shows the receivers different advanced settings options.
Examples of programming
Adding or removing an external switch
Do as follows to add an external switch:
1. Press the programming button P.
2. Select the relay to be activated by the external switch and press the programming
button for the selected relay.
3. Press the external switch.
4. Done! Check the function by pressing the external switch.
Do as follows to remove an external switch:
1. Press the programming button P.
2. Press the external switch whose function is to be removed.
3. Done! Check if the external switch has been removed.
STEP 1
STEP 2
STEP 3
STEP 4
Mono/Bi/ Public/Poly
Btn1, Mono
Btn2, Bi
Btn3, Public On
Btn4, Polycode
BtnP, Exit
Max time (sec.)
Btn1, Off
Btn2, 2
Select Relay
Select Function
Btn3, 4
Btn1, R1
Btn1, Mono/Bi/Public/Poly
Btn4, 6
Btn2, R2
Btn2, Max time
BtnP, Exit
Enter Menu
Btn3, R3
Btn3, Min time
Button P
Btn4, R4
Btn4, Delayed On time
Min time (sec.)
BtnP, Exit
BtnP, Exit
Btn1, 0
Btn2, 1
Remove ext.switch
Set ext.switch
Btn3, 5
Btn4, 30
BtnP, Exit
Delayed On time
Btn1, 0
Btn2, 2
Btn3, 4
Btn4, 6
BtnP, Exit