User's Manual

802.11b/g/n Wireless LAN Daughter board V2.1
All rights are reserved by USI. No part of this technical document can be reproduced in any form without permission of USI
.
6
2. BLOCK DIAGRAM
The WM-N-BM-02_D-REF1 is based on Broadcom BCM43362 solution.
It supports generic SPI (G-SPI), SDIO interface to connect the WLAN to the host processor.
Below is a simplified block diagram of WM-N-BM-02_D-REF1:
WM-N-BM-02_D-REF1 is WM-N-BM-02 on Daughter Board
The BCM43362 contains a Power Management Unit (PMU), a buck mode switching regulator,
and three low noise LDOs. These integrated regulators simplify power supply design in WiFi
embedded designs.
3. DELIVERABLES
The following products and software will be part of the product.
• WM-N-BM-02_D-REF1 with packaging
• Evaluation kits (with SDIO / SPI interface)
• Software utility which supporting customer for integration, performance test and
homologation. Capable of testing, loading (firmware) and configuring (MAC, CIS) for the
WM-N-BM-02_D-REF1
• Unit Test / Qualification report
• Product Specifications
• Agency certification pre-test report base on adapter boards