User's Manual

Table Of Contents

Doc No.

Rev

1.0

Document released Date.

15/8/25

Page

Description

WM-BN-BM-26_A User Manual

seqcmds.bin nvram_path=bcm943438wlpth_usi_bm26a.txt”

7 If bring-up WiFi successful, you will see the below message by dmesg cmd,

[ 459.514234] dhd_module_init in

[ 459.514241] no wifi platform data, skip

[ 459.514234] dhd_module_init in

[ 459.514241] no wifi platform data, skip

[ 459.515120] F1 signature read @0x18000000=0x1541a9a6

[ 459.518891] F1 signature OK, socitype:0x1 chip:0xa9a6 rev:0x1 pkg:0x4

[ 459.520388] DHD: dongle ram size is set to 524288(orig 524288) at 0x0

[ 459.520677] dhd_attach(): thread:dhd_watchdog_thread:8d2 started

[ 459.520743] dhd_attach(): thread:dhd_dpc:8d3 started

[ 459.520748] dhd_deferred_work_init: work queue initialized

[ 459.590966] dhdsdio_write_vars: Download, Upload and compare of NVRAM succeeded.

[ 459.642979] dhd_bus_init: enable 0x06, ready 0x06 (waited 0us)

[ 459.650556] dhd_wlfc_init(): successfully enabled bdcv2 tlv signaling, 79

[ 459.651148] dhd_wlfc_init(): wlfc_mode=0x0, ret=-23

[ 459.651152] Dongle Host Driver, version 1.201.34 (r491657)

[ 459.651154] Compiled in /usr/src/4356/open-src/src on Dec 2 2014 at 05:55:13

[ 459.651652] Register interface [eth1] MAC: 44:39:c4:11:cc:eb

8 Use WL tool to check the wifi function if works.

root@xxx:/home/xxx/Desktop/wifi# ./wl ver

7.45 RC46.0

wl0: May 28 2015 00:59:58 version 7.45.46 (r559555 WLTEST) FWID 01-b3cad1aa

Once you see logs like as 8.8, then you can start to do WiFi function test by

Tx/Rx command.

The content of this document is to be treated as strictly confidential and is not to be disclosed, reproduced or used, except as