User Guide
Table Of Contents
- APPLICABILITY TABLE
- Contents
- 1. Introduction
- 2. general Product Description
- 3. Module Connections
- 4. Electrical Specifications
- 5. Hardware Commands
- 6. Power Supply
- 1.
- 7. Antenna(s)
- 8. Hardware Interfaces
- 9. Miscellaneous Functions
- 1.
- 1.
- 1.
- 1.
- 1.
- 10. Mounting the Module on your Board
- 11. Application Guide
- 12. Packing System
- 13. Conformity Assessment Issues
- 1.
- 1.
- 1.
- 14. PRODUCT AND SAFETY INFORMATION
- 15. GLOSSARY
- 16. Document History
LE910Cx HW User Guide
1VV0301298 Rev. 34 Page 16 of 131
Not Subject to NDA
Environmental Requirements
2.5.1. Temperature Range
Mode
Temperature
Note
Operating temperature range
-40 ~ +85°C Ambient.
Temperatures outside of
the range –20°C ÷ +55°C
might slightly deviate
from ETSI specifications.
The module is fully
functional, able to make
and receive voice calls,
data calls, SMS and
GPRS traffic.
Ambient
–20°C ÷ +55°C Temperatures outside of
this range might slightly
deviate from ETSI
specifications
Storage and non-operating temperature range
–40°C ~ +90°C
Table 3: Temperature Range
2.5.2. RoHS Compliance
As a part of the Telit corporate policy of environmental protection, the LE910Cx complies
with the RoHS (Restriction of Hazardous Substances) directive of the European Union (EU
directive 2011/65/EU).
Operating Frequency Bands
The operating frequencies in GSM850, EGSM900, DCS1800, PCS1900, WCDMA & LTE
modes conform to the 3GPP specifications.
2.6.1. RF Bands per Regional Variant
Table 4 summarizes all region variants within the LE910Cx family, showing the supported
band sets in each variant.