User's Manual

2
Start to use – setting Wi-Fi
(1) To turn on the wireless motion
sensor for the first time, you need
setting the Wi-Fi environment
through the android app.
(2) Click the "Start Setting Device"
button below and click the “OK”
button in the dialog box to enter
the Wi-Fi page system.
(3) First switch the device to the setting
mode, press and hold the reset
button of the wireless motion sensor
for 3 seconds. Then select "Wisleep"
on the Wi-Fi page system, and
return to the previous page.
(4) After returning from the Wi-Fi
page, select the Wi-Fi ID from
the network list and enter the
password. If the connection is
successful, the indicator light
will be green.
Note: This step is only required for the first use, and there is no need to repeat settings when using in the same Wi-Fi environment.