User's Manual

4
Placement
Sensor installation location
Within 180 cm from the ground or within 50 cm from the bottom of the bed, and the distance
from the detection target must be at least 10 cm.
Fundamental
The wireless motion sensor detects the activity status of the application area, and the information after sensing is collected by the cloud server. Users can
download personal report from time to time to understand the daily schedule. Personal reports can be used for health care management in daily life. The
wireless motion sensor data is provided to third-party software vendors for analysis and judgment. Consumers can view information from time to time via the
Web or APP.
Hardware
architecture
RF detection frequency
24GHz
Antenna coverage angle | FOV(Field of View) ( V x H )
24° x 36°
Use place
General health activity management (Can be used for home/long-term care/postpartum care)
Detection
limit
Vibration and swing devices cannot be placed in the detection range
Output data
The signal module of the wireless motion sensor outputs the original signal, and the signal characteristics include the signal amplitude of the motion and the
signal acquisition time. The following example is used to illustrate that 1) static activity, 2) dynamic activity, and 3) no activity in the detection environment.
The value is read through the data output interface, and the software vendor provides value-added services after judgment.
1) static activity: The signal in this part can be used to determine whether the activity is static, such as resting and sleeping.
2) dynamic activity: The signals in this part are irregular and fast in frequency, which are big dynamic activities, such as getting up and leaving, walking,
waving
3) no activity: There is no change in the signal in this part, which can be regarded as no activity around, such as no people in the environment, vacant rooms,