User's Manual

6 IABP Support
Initiating Support
6.12 RECOVER BP IABP/VAD System – Operator’s Manual
2 Attach electrodes to the patient as shown in the figures below.
Electrode Locations (AHA) Electrode Locations (IEC)
3 Connect the patient ECG cable to the green ECG input connector
on the side panel of the Console.
4 Press the MENU key and select ECG Source from the IABP
menu. Select the desired ECG source (see Figure 20). The left
side of the display shows the selected source.
Figure 20 Selecting the ECG Source
RA
LA
V
RL LL
RA
LA
C
RL LL