Eye-Pal Vision User Manual Eye-Pal Vision Version 1.
Table of Content Items Enclosed in This Box...................................... 3 Assembly.............................................................. 4 Quick Start for Eye-Pal VISION ................................ 5 How to Read with Eye-Pal VISION ............................ 5 Central Front Panel Controls .................................... 6 Hidden Front Panel Controls .................................... 7 Motion Activated Controls .......................................
Items Enclosed in This Box • Folded Eye-Pal Vision • Power Supply • Power Cord • Quick Reference Guide • Warranty Card • Manual • Keypad 3
Assembly Step 1- Place Eye-Pal VISION on a flat surface with the front panel facing toward you. Step 2- Unfold the camera. Pull the camera arm up until it locks into place with a clicking sound indicating that the arm is in place. Then swivel/pull the camera head up until you hear a clicking sound indicating that the camera head is in place. Step 3- Connect the power supply to the power cord. Turn EyePal VISION around so front panel is facing away from you.
Quick Start Step 1- Clear the platform of any objects. Turn on Eye-Pal VISION by holding in the small round power button located in the center of the front panel. Step 2- Turn the volume knob, located to the right of the power button, on the front panel, clockwise. A tune will play while the device starts up. Step 3- Once Eye-Pal VISION is done loading, you will hear “Please place your document.” You are now ready to read.
To read fine print on a medicine bottle or any other small object place it in the middle of the platform. You will hear the device say, “Reading fine print.” If you remove the document, you will hear, “Please place your document”. You may either replace the document or resume reading, by pressing the Pause/Resume button on the front panel (see below) or the Pause/Resume button on the Keypad. Note: Eye-Pal VISION can only read text that is within the borders of the base platform.
Volume – the big round knob to the right of the power button, on the front panel is used to adjust the volume. To increase the volume, turn the knob clockwise. Hidden Front Panel Controls To use these controls, locate the raised edge on the lower right corner of the base. With your finger press the edge downward. The cover will open and reveal four buttons. Pause/Resume Reading – the second button from the left marked with two vertical lines. Press this button to pause or resume reading.
Restarting – Press the first button on the left side for 5 seconds. You will hear “Restarting.” Motion Activated Controls To enable the motion-activated controls, press and hold the pause button in the hidden front panel for 3 seconds. You will hear “Gesture Commands Enabled.” Pause/Resume Reading – move a hand slowly above the printed material from left to right to pause reading. Move again your hand slowly from left to right to resume reading.
Pause/Resume Button – located in the center of the arrow keys, it is a white square, marked with a raised black circle. In Reading Mode, this button will pause and resume reading. Left Arrow – located to the left of the Pause/Resume button, it is a white square, marked with a raised black Left Arrow. In Reading Mode, press this button to hear the previous word. Right Arrow – located to the right of the Pause/Resume button, it is a white square, marked with a raised black Right Arrow.
the Save button and one of the Arrow buttons at the same time. You will hear, “Image saved.” Up to four pages can be saved; one page designated to each Arrow Button. Recall Button – is the same button as the Zoom Out Button. It is located on the upper right side of the keypad; it is a white square, marked with a raised black horizontal line. Hold down the Recall button and press one of the Arrow Buttons to read a previously saved page. You will hear “Reading image.
Pause/Resume Button– is a white square, marked with a raised black circle in the center of the arrow keys. Press this button to reset the auto focus of the camera. Up Arrow – located above the center round Pause/Resume button, it is a white square, marked with a raised black Up Arrow. In Magnification Mode, press this button to increase sharpness. Down Arrow – located below the Pause/Resume button, it is a white square, marked with a raised black Down Arrow.
and Recall buttons on the keypad and press the Up Arrow button on the front panel. Continuous Line Display – To read the text in a single, running line; hold down the Recall button and the Pause/Resume button on the keypad, and then press the Down Arrow on the front panel. Line speed is controlled with the Left and Right Arrow keys on the keypad. To return to the default reading mode, press the same key combination again.
How to start scanning in Book Mode: 1. Turn on the device 2. Wait for the music to stop playing, and then plug the USB flash drive into the USB port located on the right side of EyePal VISION. You will hear, “External memory device is detected. Entering Book scan mode.” 3. Place a document or a book on the platform. 4. Wait for the camera shutter sound; this indicates that the page has been scanned. 5. Wait two seconds in between scanning pages.
If scanned images are not converted, they can be found in the Eye-Pal Images folder. We suggest renaming the MP3 and text files to make them meaningful to you (name of the document, book). Headphones (or External Speakers) Instructions 1. Headphones with a pin audio jack are compatible with EyePal VISION. 2. With the device on, plug the headphones or speakers into Eye-Pal VISION. The headphone jack is located on the right side of the device.
Then locate the button on the joint that is towards the back on the right side of the platform. While holding the arm of the camera press the button and slowly lower the arm it until it lays flat on the platform. Tips for Best Performance • Give Eye-Pal VISION time to work. For optimal performance, Eye-Pal VISION should process only one command at a time. • When Eye-Pal VISION is starting up, make sure that there is no document on the base and that the ABiSee logo is not covered.
Troubleshooting Eye-Pal VISION is trouble free most of the time due to its simple, yet effective design. However, if you encounter a problem, here are some tips: 1. If Eye-Pal VISION freezes up, stops responding to your commands or is acting abnormally, please hold the triangle button in the hidden front panel for several seconds. You will hear “Restarting”. This process does not restart the device itself, just the software. 2.
ABiSee, Inc. WARRANTY 2 YEAR WARRANTY ON ALL ABiSee, Inc. PRODUCTS: ABiSee, Inc. warrants to the original purchaser that its products are free from defects in materials and workmanship for two years from the date of purchase.
through authorized distributors. Online auction confirmations are not accepted for warranty verification and ABiSee, Inc. will not replace missing components from any package purchased through an online auction or any other authorized source. ABiSee, Inc. retains the exclusive right to either repair or replace the unit with a refurbished unit or new unit at its sole discretion. The same policy shall apply to software.
Notes: 19
Thank You for Choosing Eye-Pal VISION Your Local Distributor is: ABiSee, Inc. 20 Main St, Suite G2 Acton, MA 01720 + 1-800-681-5909 or +1-978-635-0202 www.abisee.