Specifications

2-342-34

2-34

Chapter 2: BIOS setupChapter 2: BIOS setup

Chapter 2: BIOS setup

Case Open Warning [Enabled]Case Open Warning [Enabled]

Case Open Warning [Enabled]

Enables or disables the chassis open status feature. Setting to Enabled,

clears the chassis open status. Refer to section “2.7 Internal connectors”

for setting details. Configuration options: [Disabled] [Enabled]

Quick Boot [Enabled]Quick Boot [Enabled]

Quick Boot [Enabled]

Setting to [Enabled] allows the system to skip certain tests while booting,

decreasing the time needed to boot the system.

Configuration options: [Disabled] [Enabled]

Boot Up Floppy Seek [Enabled]Boot Up Floppy Seek [Enabled]

Boot Up Floppy Seek [Enabled]

When [Enabled], the BIOS will seek the floppy disk drive to determine

whether the drive has 40 or 80 tracks. Configuration options: [Disabled]

[Enabled]

Bootup Num-Lock [On]Bootup Num-Lock [On]

Bootup Num-Lock [On]

Allows you to select the power-on state for the NumLock.

Configuration options: [Off] [On]

OS Select for DRAM > 64MB [Non-OS2]OS Select for DRAM > 64MB [Non-OS2]

OS Select for DRAM > 64MB [Non-OS2]

Select [OS2] only when you are using an OS2 operating system with

greater than 64MB RAM; otherwise, set to [Non-OS2].

Configuration options: [Non-OS2] [OS2]

2.6.32.6.3

2.6.3

Boot settings configurationBoot settings configuration

Boot settings configuration

Boot Settings Configuration

Case Open Warning [Disabled]

Quick Boot [Enabled]

Boot Up Floppy Seek [Enabled]

Bootup Num-Lock [On]

OS Select for DRAM > 64MB [Non-OS2]

Full Screen Logo [Enabled]

Halt On [No Errors]

Select Menu

Item Specific Help

Press [Enter] to enable

or disable.