User Guide

Quick Installation
A-1
Appendix A Quick Installation
Appendix A will give you a simplified installation procedure, in order to
allow you to install your mainboard quickly and correctly.
If you need further information or if you need to change some other settings,
read from Chapters 1.
Mount the retention mechanism onto Slot 1, then
fix the screw on the four corners of the mechanism. Slightly and gently
insert the Pentium
®
II processor into the retention base, make sure all the
components are affixed securely.
According to your CPU speed, set up the CPU
in the CPU SOFT MENU™ of the BIOS SETUP.
DIMM1 ~ DIMM2
FDC- Connect one end of the 34-pin cable that comes
with the drive to the FDD connector, and the other end of the cable to the FDC
pin connector on the mainboard.
Note: Be sure that the red line on the cable connects to the first pin of the
connectors.
Installing the CPU:
Adjusting CPU speed:
Installing DRAM:
Installing FDD: