User`s manual

Chapter 4
AT7-MAX2
4-28
Power On Function:
Four options are available: Hot Key  Password  Mouse  Button Only. The default setting is Button
Only. This iten allow you to choose the computer power turn on method you like. Some item you choose,
some of the following items will be available to let you making further setting. For instance, when you set
this item to Password, the item of “KB Power On Password” will allow you to enter password. When
you set this item to Hot Key, the item of “Hot Key Power On” will allow you to choose the hot key you
want. If you choose Mouse, you can press any key on mouse to turn on the computer power.
 KB Power On Password:
When you perss the <Enter> key, then you can enter the password you want. When set be done, you
need to saving and leave the BIOS setting menu to reboot your computer system. Next time when
you shutdown your computer, you can’t use the power button to turn on the computer power
anymore. You need to press the password to turn on your computer power.
 Hot Key Power On:
Fifteen options are available: Ctrl+F1 ~ Ctrl+F12, Power, Wake and Any Key. The default setting is
Ctrl+F1. You can choose the hot key that you want it to turn on your computer power.
Resume by OnChip USB:
Two options are available: Disabled or Enabled. The default setting is Disabled. When set to Enabled,
any event affecting from onchip USB will awaken a system that has powered down.
Wakeup by PME# of PCI:
Two options are available: Disabled or Enabled. The default setting is Disabled. When set to Enabled,
any event affecting from PCI card (PME) will awaken a system that has powered down.
Wake by Alarm:
Two options are available: Disabled or Enabled. The default setting is Disabled. When set to Enabled,
you can set the date and time at which the RTC (real-time clock) alarm awakens the system from Suspend
mode.
 Date (of Month) / Resume Time (hh:mm:ss):
You can set the Date (month) Alarm and Time Alarm (hh:mm:ss). Any event occurring will awaken a
system that has powered down.
Power Button Function:
Two options are available: Delay 4 Sec or Instant-Off. The default setting is Instant-Off. It is activated
when the user presses the power button for more than four seconds while the system is in the working
state, then the system will transition to the soft-off (Power off by software). This is called the power
button over-ride.
Run VGABIOS if S3 Resume:
Three options are available: Auto  Yes  No. The default setting is Auto. This item can let you choose
when S3 resume active, the VGA BIOS need to be initiative or not.