User Guide

BIOS Setup 3-7
# Voltage Monitoring:
Click <Enter> key to enter its submenu:
µGuru Utility V1.00
OC Guru ABIT EQ
V
oltage r Monito ing
Reading Shutdow
le
n
Enab
Beep
leEnab
High
Limit
Low
t Limi
(*)CPU Core Voltage 1.32 V (*) (*) 1.6 V 0 V
(*)DDR Voltage 2.67 V ( ) (*) 3.10 V 2.10 V
(*)DDR VTT Voltage 1.32 V ( ) (*) 1.55 V 1.05 V
(*)HyperTransport 1.2V Voltage 1.23 V ( ) (*) 1.45 V 0.95 V
(*)1.8V Voltage 1.84 V ( ) (*) 2.15 V 1.45 V
(*)1.8V Dual Voltage 1.87 V ( ) (*) 3.00 V 2.00 V
(*)CPU VDDA 2.5V Voltage 2.65 V ( ) (*) 1.80 V 1.20 V
(*)ATX +12V (24-Pin Connector) 12.07 V ( ) (*) 14.40 V 9.60 V
(*)ATX +12V (4-Pin Connector) 12.13 V ( ) (*) 14.40 V 9.60 V
(*)ATX +5V 5.14 V ( ) (*) 6.00 V 4.00 V
(*)ATX +3.3V 3.41 V ( ) (*) 3.95 V 2.65 V
(*)ATX 5VSB 5.14 V ( ) (*) 6.00 V 4.00 V
(*)PCIE 1.2V Voltage 1.20 V (*) (*) 0.00 V 0.00 V
(*)NB 1.2V Voltage 1.19 V (*) (*) 0.00 V 0.00 V
↑↓:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit
All Voltages:
These items display the voltage of each element.
! Shutdown Enable:
Use <Space> key to enable system shutdown function. If the voltage of corresponding element is
higher/lower than the high/low limit, the system would automatically shutdown.
! Beep Enable:
Use <Space> key to enable warning beeps function. If the voltage of corresponding element is
higher/lower than the high/low limit, warning beeps will sound.
! High/Low Limit:
These items set the high and low voltage limit.
NOTE: The value of high limit must be set above the one of low limit.
User’s Manual