User`s manual

3-8 Chapter 3
3.5. Install & Connect the Optical Drive and Card Reader
The optical-drive holder of this system is capable of installing two 5.25” optical
drives. The diagrams illustrated here are using one optical drive for example.
Don’t forget the Master/Slave configuration when installing two optical drives.
The card reader is already installed
beneath the lower layer of the optical
drive. Check the signal cable
connection.
Install one optical drive into the upper
layer of drive holder. Fasten the
optical drive to the drive holder.
The dimension of optical drive is
limited to 199mm deep.
To install a second optical drive, the
shielding plate that was originally
secured at the lower layer has to be
removed first.
AB-2003 DigiDice