User`s manual

4-18 Chapter 4
4.6. Power Management Setup
ACPI Suspend Type:
This item selects the type of Suspend mode.
[S1(POS)]: Enables the Power On Suspend function.
[S3(STR)]: Enables the Suspend to RAM function.
 Run VGABIOS if S3 Resume:
Three options are available: Auto  Yes  No. The default setting is Auto. This
item can let you choose when S3 resume active, the VGA BIOS need to be initiative
or not.
 USB Dev Wake-Up From S3:
When set to [Enabled], this item allows you to use a USB device to wake up a system
that is in the S3 (STR - Suspend To RAM) state. This item can only be configured if
the [ACPI Suspend Type] field is set to [S3(STR)].
Soft-Off by PWR-BTTN:
This item selects the method of powering off your system:
AB-2003 DigiDice