User`s manual

6-2 Chapter 6
6.2. Easy OC (Over Clocking) Setting
One of the most distinguished features of this mini PC system is the Over
Clocking function. ABIT is now bringing you a non-overclocker proof
technology with only 1-2-3 steps. This Easy OC setting increases the CPU
Front Side Bus speed from 3% to 15% in the beginning of powering on your
system. No need to enter the complicated setup menu of BIOS utility, all you
have to do is to:
Step 1: Dial the Knob Controller.
Step 2: Make your selection.
Step 3: Press the Knob Controller to apply with your selection.
There are six options from [OC 0] through [OC 5] when powering on the
system. A successful over clocking setting within these options from [OC 1]
through [OC 5] will keep the system maintained until a next modification. A
fail setting will reset the system to the non-overclocking [OC 0] status.
Note: Due to the restriction of CPU specification and many unpredicted
system hardware environmental factor, there is no guaranty to make a
successful over clocking setting.
OC 0:
Dial the Knob Controller clockwise. The LCD
screen displays the OC number 0.
OC 1:
Dial the Knob Controller one clockwise click in the
[OC 0] status; the LCD screen displays the OC step
1. This [OC 1] setting increases the CPU speed 3%
up. One counter clockwise click will dial back
one-step to [OC0].
AB-2003 DigiDice