User`s manual

6-4 Chapter 6
6.3. Powering On The System
To power on the system, you may:
(1) Press the Knob Controller after finished the OC setting.
(2) Press the Knob Controller without making the OC setting.
or
(3) Press the <Power> button on Remote Controller.
Screen Shot 1:
All the icons illuminated for a short while.
Screen Shot 2:
The screen displays the “Easy OC Setting” page.
The default setting is [OC 0]. You may dial the
Knob Controller to enter the setting, or leave it
without touching.
Screen Shot 3:
The screen displays the “Time” page. The time
figure will be calibrated to the local hour according
to your system time.
Screen Shot 4:
The screen displays: (1) The network-connecting
icon if this system is connected to LAN, and (2) The
volume level icon.
N
ow the system is ready to enter the Hardware
Monitoring page and the of Hot-key application
status.
AB-2003 DigiDice