User`s manual

3-4 Chapter 3
 Cylinder
This item configures the numbers of cylinders.
 Head
This item configures the numbers of read/write heads.
 Precomp
This item displays the number of cylinders at which to change the write timing.
 Landing Zone
This item displays the number of cylinders specified as the landing zone for the
read/write heads.
 Sector
This item configures the numbers of sectors per track.
Drive A
This item sets the type of floppy drives installed.
[None]: No floppy drive installed
[360K, 5.25 in.]: 5.25-inch standard drive; 360KB capacity
[1.2M, 5.25 in.]: 5.25-inch AT-type high-density drive; 1.2MB capacity
[720K, 3.5 in.]: 3.5-inch double-sided drive; 720KB capacity
[1.44M, 3.5 in.]: 3.5-inch double-sided drive; 1.44MB capacity
[2.88M, 3.5 in.]: 3.5-inch double-sided drive; 2.88MB capacity
Video
This item selects the type of video adapter used for the primary system monitor.
[EGA/VGA]: (Enhanced Graphics Adapter/Video Graphics Array) For EGA, VGA,
SVGA and PGA monitor adapters.
[CGA 40]: (Color Graphics Adapter) Power up in 40-column mode.
[CGA 80]: (Color Graphics Adapter) Power up in 80-column mode.
[Mono]: (Monochrome adapter) Includes high-resolution monochrome adapters.
Halt On
This item determines whether the system stops if an error is detected during system
boot-up.
IS-10 / IS-11 / IS-12