User Guide Multiband-Transceiver MBT-1 KH669111xx Multiband-Transceiver MBT-1 Version 2020-05-18 © ABITRON Control Systems GmbH Wiesnerstraße 20 A-4950 Altheim Änderungen vorbehalten! changes reserved!
1 Module Description The Multiband-Transceiver MBT-1 is primary used as a central receiving unit, which receives the data telegram sent by the Coder CMB-1 via an integrated RF part and converts it into a digital data telegram, which is valid for the receiver board. The integrated RF-part is designed as a multiband transceiver, which allows the receiving of control commands from the transmitter as well transmitting feedback data to the transmitter.
5 Integration Instructions for host product manufacturers according to KDB 996369 D03 OEM Manual v01 5.1 List of applicable FCC & RSS rules Part 15.247 RSS-247 5.2 Specific operational use conditions This module is approved for use in portable and mobile applications. Integrators must supply operating instructions for end users and installers to satisfy RF exposure compliance requirements are met. Integrators and installers must also make sure that compliance with Part 15B are ensured. 5.
5.7 Label and compliance information The MBT-1 module is labelled with its own FCC/IC ID. If the FCC/IC ID is not visible when the module is installed inside another device, then the outside of the device into which the module is installed must also display a physical label or eLabel referring to the enclosed module.
6 Certification Informations 6.1 FCC/IC This device complies with part 15 of the FCC Rules and RSS-247 of the Canadian RSS rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
