- Able Planet, Inc. Swimming Pool User Manual

Chapter 1 Siemens 9751 9006i DTMF Integration
Programming the Phone System
1-6
Siemens 9751 9006i DTMF Integration Guide
OL-1747-02
Step 3 Repeat Step 2 for each remaining SLMA voice messaging port that answers calls.
Step 4 Use the ADDSCSU command to create the first SLMA voice messaging port the
sets MWIs. Each voice messaging port that sets MWIs must have the following
parameters while the remaining parameters keep their default values.
NYTPE NAT
ACTCDE (leave field blank)
HTLNIDX (leave field blank)
DEVFUNC EXTVCML
INS Y
LCRCOSV1 0
LCRCOSV2 0
Table 1-3 ADDSCSU Parameter Settings for MWI Ports
Parameter Required Setting
STNO <the extension number>
PEN <the port equipment number>
DPLN 0
ITR 1 (assign the port to an ITR group that can dial subscribers,
but can’t be dialed by subscribers)
COS1 <a class of service with only MSCWCAP (message-waiting
capability)>
COS2 <a class of service with only MSCWCAP (message waiting
capability)>
COSX (leave field blank)
PUBSCR <the PSTN prefix plus the extension number>
NYTPE NAT
ACTCDE (leave field blank)
Table 1-2 ADDSCSU Parameter Settings for Answering Ports
Parameter Required Setting