- Able Planet, Inc. Swimming Pool User Manual

Chapter 2 Dual Phone System Integration
Changing the Number of Installed Ports
2-8
Siemens 9751 9006i DTMF Integration Guide
OL-1747-02
Step 2 For each device, in the Switch list select the phone system that Cisco Unity uses
to dial out when notifying subscribers of new messages. Each notification device
can be associated with a specific phone system (except for text pagers).
Cisco Unity uses the phone system specified on the subscriber template’s Profile
page as the default.
Step 3 Adjust other settings as appropriate. For more information, see the online Help in
the Cisco Unity Administrator.
Caution The selected phone system must have at least one port set to dial out for
message notifications on the System > Ports page. If the selected phone system
does not have any ports set for this function, notifications will fail.
Changing the Number of Installed Ports
After the dual phone system integration is set up, if you need to add or remove
voice cards or uninstall voice card software, follow these steps:
1. Remove the existing AV-Cisco service provider. For details, see the “To
remove the existing AV-Cisco TSP” section on page 2-9.
2. As appropriate, remove or add voice cards, or uninstall and reinstall the voice
card software. For information about removing Dialogic voice card software,
refer to the chapter about voice cards in the Cisco Unity Installation Guide.
3. Reinstall the AV-Cisco service provider after you have set up the voice cards
or reinstalled the voice card software. For details, see “To reinstall the
AV-Cisco service provider” section on page 2-9.
4. Adjust the port assignments on the System > Ports page. The voice messaging
ports must appear in this order in the list of ports: first are all the ports
connected to the traditional phone system, second are the ports connected to
CallManager.
If you completely remove the traditional phone system, you must adjust the port
assignments for Cisco CallManager on the System > Ports page, after the voice
cards and voice card software used in the integration with the traditional phone
system have been removed.