User's Manual

CHAPTER
1-1
Siemens 9751 9006i DTMF Integration Guide
OL-1747-02
1
Siemens 9751 9006i DTMF Integration
Integration Overview
Before performing the following integration steps, confirm that the Cisco Unity
™
server is ready for the integration by completing the appropriate tasks in the
Cisco Unity Installation Guide.
Integration Steps
Follow these steps to set up this integration.
1. Review the system and equipment requirements to confirm that all phone
system and Cisco Unity server requirements have been met. See the
“Requirements” section on page 1-2.
2. Program the phone system and extensions. See the “Programming the Phone
System” section on page 1-4.
3. Configure Cisco Unity for the integration. See the “Configuring Cisco Unity
for the Integration” section on page 1-10.
4. Test the integration. See the “Testing the Integration” section on page 1-12.