User's Manual

Chapter 1 Siemens 9751 9006i DTMF Integration
Configuring Cisco Unity for the Integration
1-10
Siemens 9751 9006i DTMF Integration Guide
OL-1747-02
Step 10 Program each phone to forward calls to the pilot number assigned to the voice
messaging ports, based on one of the following Cisco Unity call transfer types
shown in Table 1-8.
Configuring Cisco Unity for the Integration
After ensuring that the Cisco Unity server is ready for the integration by
completing the appropriate tasks in the Cisco Unity Installation Guide, perform
the following procedures to confirm that the integration is enabled and to enter the
port settings.
To confirm that the integration is enabled
Step 1 On the Cisco Unity server, go to the Cisco Unity Administrator by doing one of
the following:
• In Internet Explorer, go to http://<server name>/web/sa.
• Double-click the desktop shortcut to the Cisco Unity Administrator.
Step 2 Go to System > Licensing > Licensed Features.
Step 3 In the Integration field, confirm that the setting is Analog for a single phone
system integration or Multiple Integrations for a dual phone system integration.
Ta b l e 1- 8 C a l l Tr a n s fe r Ty p e s
Transfer Type Usage
Release transfer
(blind transfer)
Program the phone to forward calls to the pilot
number when:
• The extension is busy
• The call is not answered
Supervised transfer Program the phone to forward calls to the pilot
number only when the call is not answered.
Confirm that call forwarding is disabled when the
extension is busy.