User guide

Programming Special Features

There are a few features you can program into the

System. A typical user will not need these features - and

may skip to the next page. If you choose to change any

of these features, use the same programming set-up as

before:

1. First establish a phone connection with another

phone such as your cell phone.

2. Slide the switch at the back of the Base to “Learn

Mode” then use these directions for any option you

choose to change:

Option #1 – Dial 9 Before Number (important if your phone

system requires a 9 before getting an outside line - par-

ticularly when it calls 911)

1. Enter 1234

[Voice prompt – Option Mode]

2. Enter – 1 [Voice prompt – Dial 9 before number, 1

for YES – 3 for NO

3. Enter either 1 or 3

[Voice prompt 1 – YES]

or, [Voice prompt 3 – NO] – FACTORY SETTING

4. Enter # (to exit programming mode) Voice prompt –

Programming complete]

5. Slide Programming Switch to “Friend, 911 – Friends

Only – 911 Only”

Option #4 – DEMO/Tradeshow Mode – THIS MODE IS FOR

DEMO MODE ONLY FOR SALESPERSONS. This feature