Manualshelf

User Manual

ManualsBrandsAbleton ManualsAudio SoftwareLive 8 - Upgrade from Version 7 - SOFTWARE FOR AUDIO PRODUCTIONS
171172173174175176177178179180
Table Of Contents
CHAPTER 13. ROUTING AND I/O 175
Routing Points in Racks
Tap Points for Every
Chain in a Track.
If a track has one or more Instrument or Effect Racks in its device chain, internal routing
points (Pre FX, Post FX and Post Mixer) will also be available for every chain within the Rack.
If a track contains one or more Drum Racks, internal routing points will be available for any
of the Rack's return chains. Each Rack will also be listed in the Input Channel chooser:
(Rack Name) | (Chain Name) | Pre FX The signal will be tapped from the point that it
enters the Rack, before it reaches the chain's devices.
(Rack Name) | (Chain Name) | Post FX The signal will be tapped from the end of the
chain, but before it passes to the chain's mixer.
(Rack Name) | (Chain Name) | Post Mixer The signal will be tapped from the output of
the chain's mixer, just before the point where all of the chains in the Rack are summed
together to create the Rack's output.
Soloing a track that taps a Chain at any of these points will still allow you to hear the output
at that point.