User Manual

CHAPTER 21. LIVE AUDIO EFFECT REFERENCE 314
2. Record at least one pass of material into Looper.
3. Create another audio track.
4. In the new track's top Audio From and Audio To choosers, select the
track containing the Looper.
5. In the new track's bottom Audio From and Audio To choosers, select
Insert-Looper.
6. Switch this track's Monitoring to In.
7. Add additional effects devices to the device chain of the new track.
8. Put Looper into Overdub mode.
Looper's output will now be routed through the other track's device chain and then back
into itself, creating increasingly processed overdub layers with each pass.
21.19 Multiband Dynamics
The Multiband Dynamics
Effect.
The Multiband Dynamics device is a exible tool for modifying the dynamic range of au-
dio material. Designed primarily as a mastering processor, Multiband Dynamics allows for
upward and downward compression and expansion of up to three independent frequency
bands, with adjustable crossover points and envelope controls for each band. Each fre-
quency range has both an upper and lower threshold, allowing for two types of dynamics
processing to be used simultaneously per band.