Instruction Manual

12.7. INTERNAL ROUTINGS 164
The Instrument Has
Been Isolated in a
Dedicated Track.
We might be bothered by the fact that muting the pad track (by turning off its Activator
switch) also mutes the other MIDI track. To be precise, the other track keeps playing, but its
MIDI is played by an instrument that is out of the mix. This can be easily remedied by cutting
the clips from the pad track and pasting them into a third track that can be independently
muted (and that can hold its own MIDI effects). The original pad track now acts as a mere
instrument container. As we are not recording new clips into this track, we can set its Input
Type chooser to No Input, which makes its Arm button disappear and helps to avoid
confusion when the mixer's In/Out section is hidden.
12.7.5 Tapping Individual Outs From an Instrument
Some software instruments, like Live's
Impulse percussion sampler, offer multiple audio
outputs for the signals they produce. By default, Impulse mixes the output of its eight
sample slots internally and delivers the mix at the instrument's audio out. Any audio effects
following Impulse in the same track process the composite signal. Sometimes it is desirable
to take an individual drum sound out of the mix for individual effects processing and mixing.
This is possible because Impulse offers its sample slots as audio sources to other tracks.