User Guide
22.4. TRANSPORT 331
using these buttons. The LEDs above these buttons are illuminated when a
previous/next locator is available in the respective direction.
2. Loop On/Off Toggles the Arrangement Loop switch on/off.
3. Punch-In/Punch-Out Toggles Live's Punch-In/Punch-Out switches on/off.
4. Home Jumps to the Arrangement start, 1.1.1.
5. End Jumps to the Arrangement end.
6. Rew/Forw When pressed once, these buttons will move the play position one
beat backward/forward. When held down, the buttons move forward/backward
in increments of one bar during Arrangement playback, one beat if the Ar-
rangement is stopped. Holding down the Mackie Control's Alt button when the
Arrangement is playing will also move in one-beat increments forward/backward.
7. Stop Stops Arrangement playback.
8. Play Plays the Arrangement from the song start or insert marker.
9. Record Toggles the Record button on/off.
10. Arrows
In the Session View, the arrows navigate through the Session View grid.
Pressing the zoom button in the middle of the arrows will re the currently
selected clip, or stop another playing clip in the same track if the currently
selected slot is empty. To stop playing the selected clip, hold down the
Mackie Control's Options button while pressing zoom, and use the Alt
button to add/remove the selected slot's Clip Stop button.
Note that the LEDs associated with the zoom buttons will display the play
status of a clip: an illuminated LED signies a playing clip; a blinking LED
signies a clip that has been triggered but is not yet playing; and an unillu-
minated LED signies a stopped clip or empty slot.