Reference Manual
CHAPTER 8. CLIP VIEW 102
sixteenths; for unwarped clips, the display is in minutes-seconds-milliseconds. Notice that
you can use the Set buttons here to place the markers during playback. Setting markers this
way is quantized according to global quantization.
Clicking in the scrub area in the lower half of the waveform or above the beat-time ruler will
make clip playback jump to that point.
The Clip Scrub Area.
The size of this jump is quantized by the global quantization setting, which can be quickly
changed using the
Ctrl
6
(PC) /
6
(Mac),
7
,
8
,
9
and
0
shortcuts. While
the mouse is held down over the scrub area, a portion of the clip the size of the chosen
quantization setting will be repeatedly played. With small quantization settings, or a setting
of None, this allows you to scrub through the music.
Looping Clips
To have the clip play as a (potentially innite) loop, turn on the Loop switch. Note that
the Warp switch must be activated before the Loop switch is accessible, as unwarped clips
cannot be looped.
You can click and drag to change the position and length of the loop brace in the Sample
Display, or you can type exact values into the Loop Length and Position elds to the left of
the display.