Reference Manual
CHAPTER 13. MIXING 161
Let's look at the mixer controls:
1
2
1
3
6
5
4
4
5 6
32
The Mixer Controls.
1. The Meter shows the track's RMS (average) and peak output level. While moni-
toring, however, it shows the input level.
2. The Volume control adjusts the track's output level.
3. The Pan control positions the track's output in the stereo eld. To reset the Pan
control to center, click on its associated triangle.
4. To mute the track's output, turn off the Track Activator switch.
5. The Solo switch solos the track by muting all other tracks, but can also be used
for cueing. Tracks can only be soloed one at a time unless the Exclusive Solo
option in the Record/Warp/Launch Preferences is deactivated. Alternatively, you
can hold down the
Ctrl
(PC) / (Mac) modier to solo more than one
track.
6. If the Arm Recording button is on, the track is record-enabled. Tracks can only be
armed one at a time unless the Exclusive Arm option in the Record/Warp/Launch
Preferences is deactivated. Alternatively, you can hold down the
Ctrl
(PC) /
(Mac) modier to arm more than one track.