Reference Manual
CHAPTER 19. LIVE AUDIO EFFECT REFERENCE 245
The second lter, essentially an equalizer, is used for controlling higher frequencies. It is
shaped with the Freq (cutoff frequency), Width and Depth controls.
The Output control attenuates the level at the device output. When the Soft Clip switch is
activated, Saturator will also apply an instance of its Analog Clip curve to the output.
The Dry/Wet control adjusts the balance between the processed and dry signals. Set it to
100 percent when using Saturator in a return track.
19.21 Simple Delay
The Simple Delay Effect.
The Simple Delay provides two independent delay lines, one for each channel (left and
right).
To refer delay time to the song tempo, activate the Sync switch, which allows using the
Delay Time beat division chooser. The numbered switches represent time delay in 16th
notes. For example, selecting 4 delays the signal by four 16th notes, which equals one
beat (a quarter note) of delay.
If the Sync switch is off, the delay time reverts to milliseconds. In this case, to edit the delay
time, click and drag up or down in the Delay Time eld, or click in the eld and type in a
value.
The Feedback parameter denes how much of each channel's output signal feeds back into
the delay lines' inputs. Internally, they are two independent feedback loops, so a signal on
the left channel does not feed back into the right channel and vice versa.