Reference Manual
CHAPTER 8. CLIP VIEW 109
the sample currently in use - but only the excerpt that is actually used plus a 50 millisecond
safety margin on both ends. The new sample can be found, after saving the Live Set, in the
Set's Project folder, under Samples/Processed/Crop. Until the Set is saved, the new sample
remains at the location specied by the Temporary Folder.
8.2.10 Replacing and Editing the Sample
To replace the sample referenced by the clip with a different one, drop the new sample
directly from the File Browser into the Clip V iew. Clip settings like pitch and volume will
be retained. The Warp Markers will be retained only if the new sample has the exact same
length as the old sample.
The Sample Display's (PC) /
Ctrl
(Mac) context menu includes the Reveal Sample
command. This opens the File Manager for the current Set with the sample referenced by
the clip selected. From there, you can replace and destructively edit the sample, in such a
way that all clips and instruments referencing the sample will be affected.
8.3 The Notes Box
The Notes Box.