Reference Manual

CHAPTER 20. LIVE AUDIO EFFECT REFERENCE 275
The Dry/Wet control adjusts the balance between the processed and dry signals. Set it to
100 percent when using Simple Delay in a return track.
20.22 Utility
The Utility Effect.
Utility can perform some very useful tasks, especially in combination with other devices.
The Mute button simply silences the incoming signal when enabled. Note: The active/mute
controls of a track are always placed at the very end of the signal chain. However, since you
can place Utility anywhere in a signal chain, you can use its mute function to cut the input
of a delay line or reverb without turning off the output of these devices.
The Gain control adjusts the level of the input signal +/- 35 dB.
The Channel Mode chooser allows selective processing of the left and right channels of a
sample. If, for example, Left is selected, the right channel is ignored and the left channel
appears on both outputs. This is especially useful if you have a stereo le that contains
different infor mation on both channels and you want to use only one.
The Panorama chooser pans the signal anywhere in the stereo eld. Its main purpose is to
individually pan an Instrument or Effect Rack's parallel device chains.
The Width control acts as a continuous mono to stereo controller when set from 0 to 100
percent. However, beyond 100 percent the output starts to fold in on itself. At 200
percent the output contains only the difference between the left and right channels. If