Reference Manual

CHAPTER 21. LIVE AUDIO EFFECT REFERENCE 286
Near On-Axis
Near Off-Axis
Far
Cabinet Mic Positions.
The switch below the Microphone chooser toggles between a Dynamic and Condenser
mic. Dynamic mics are a bit grittier and commonly used when close-micing guitar cabinets
because they are capable of handling much higher volumes. Condenser mics are more
accurate, and are commonly used for micing from a distance. Of course, Cabinet's virtual
condenser mic won't be damaged by high volume levels, so feel free to experiment.
The Output switch toggles between mono and stereo (Dual) processing. Note that in Dual
mode, Cabinet uses twice as much CPU.
The Dry/Wet control adjusts the balance between the processed and dry signals.
21.5.1 Cabinet Tips
Here are some tips for using Cabinet:
Amps and Cabinets
Guitar cabinets are normally fed by guitar amps. For this reason, Cabinet is paired with
Amp, and the two are normally used together. But you can also achieve interesting and