Reference Manual

CHAPTER 21. LIVE AUDIO EFFECT REFERENCE 316
Empty
Record Play
Overdub
Stopped
Clear
Undo/Redo
Click
Doubleclick
Hold
Diagram of Looper's
Multi-Purpose Transport
Button Behavior
Looper's Multi-Purpose Transport Button is optimized for use with a MIDI footswitch. To
assign a footswitch, enter MIDI Map Mode, click the button and then press your attached
footswitch. Then exit MIDI Map Mode.
The Tempo Control chooser affects how Looper determines the tempo of recorded material:
None: Looper's internal tempo is independent of Live's global tempo.
Follow song tempo: The speed of Looper's playback will be adjusted so that the
recorded material plays back at Live's global tempo.
Set & Follow song tempo: Live's global tempo will be adjusted to match the tempo
of material recorded into Looper. Any subsequent changes to Live's global tempo will
adjust the speed of Looper's playback so that the recorded material plays back at the
new global tempo.
The Record Length chooser is used to set the length of recorded material. Its behavior
changes depending on whether or not Live's global transport is running and, depending on
the setting of the Tempo Control chooser, can set Live's global tempo:
Song running: If Looper's Record Length chooser is set to the default x bars, Looper
will record until you press another transport button. If you specify a xed number of
bars to record by selecting another option in the chooser, Looper will record for the