Reference Manual

CHAPTER 21. LIVE AUDIO EFFECT REFERENCE 341
The stereo/mono switch determines whether the Pinch distortion occurs in stereo or mono.
Set it to stereo for realistic simulation of vinyl distortions.
The Crackle section adds noise to the signal, with noise density set by the Density control.
The Volume control adjusts the amount of gain applied to the noise.
21.33 Vocoder
The Vocoder Effect.
A vocoder is an effect that combines the frequency information of one audio signal (called
the carrier) with the amplitude contour of another audio signal (called the modulator). The
modulator source is generally something with a clear rhythmic character such as speech or
drums, while the carrier is typically a harmonically-rich synthesizer sound such as a string or
pad. The most familiar application of a vocoder is to create talking synthesizer or robotic
voice effects.
Vocoders work by running both the carrier and modulator signals through banks of bandpass
lters. The output level of each of the modulator's lters is then analyzed and used to control
the volume of the corresponding lter for the carrier signal.
Live's Vocoder should be inserted on the track that contains the audio material you plan to
use as your modulator. The Carrier chooser then provides a variety of options for the carrier
signal:
Noise uses Vocoder's internal noise generator as the carrier source. With this selected,
an X-Y display is shown which allows you to adjust the character of the noise. The
horizontal axis adjusts downsampling. Click and drag to the left to decrease the