Reference Manual

CHAPTER 23. LIVE INSTRUMENT REFERENCE 406
Modulation Targets
These modulation targets are available as MIDI routing destinations in the global display,
and also as modulation targets for the LFO and pitch envelope.
Off  Disabled this controller's modulation routing.
OSC Volume A-D  Modulates the volume of the selected oscillator.
OSC Crossfade A/C  Crossfades the volumes of the A and C oscillators based on the value
of the modulation source.
OSC Crossfade B/D  Crossfades the volumes of the B and D oscillators based on the value
of the modulation source.
OSC Feedback  Modulates the amount of feedback for all oscillators. Note that feedback
is only applied to oscillators that are not modulated by other oscillators.
FM Drive  Modulates the volume of all oscillators which are modulating other oscillators,
thus changing the timbre.
Filter Frequency  Modulates the cutoff frequency of the lter.
Filter Q  Modulates the resonance of the lter.
Filter Envelope Amount  Modulates the lter's envelope intensity.
Shaper Drive  Modulates the amount of gain applied to the lter's waveshaper.
LFO Rate  Modulates the rate of the LFO.
LFO Amount  Modulates the intensity of the LFO.
Pitch Envelope Amount  Modulates the intensity of the pitch envelope.
Volume  Modulates Operator's global output volume.
Panorama  Modulates the position of Operator's output in the stereo eld.
Tone  Modulates the global Tone parameter.
Time  Modulates the global control for all envelope rates.