Reference Manual

CHAPTER 5. MANAGING FILES AND SETS 55
Template.als.
In addition to the template Set that loads by default, the Live Library contains a folder
called Templates. This is a collection of Sets with pre-congured tracks and routing
congurations for a variety of common recording scenarios.
5.5.5 Viewing and Changing a Live Set's File References
To view a list of the les referenced by the current Live Set, choose the Manage Files
command from the File menu, click the Manage Set button, and then click the View Files
button. Live will display one line for each le used by the Live Set. To list all clips or
instruments in the Live Set where the le is actually used, click the triangle to expand the
line. Here is what you can do:
Replace a le  Dragging a le from the File Browser and dropping it on an entry in the
list makes the Live Set reference the new le instead of the old one. For samples used
in audio clips, Live retains the clip properties; the Warp Markers are kept if the new
sample has the same or a greater length as the old sample and discarded otherwise.
Please note that replacing a sample will change all clips in your set that reference this
sample.
Every Entry in the File
Reference List is a Drop
Target for Files.
Hot-swap les  Using the Hot-Swap button at the left-hand side of each entry, you
can quickly browse through alternatives for the le that is currently being referenced.
This is like dragging les here, only quicker.
The File Reference List's
Hot-Swap Button.