Reference Manual

193 Mixing

The Mixer Section Selectors.

Let’s look at the mixer controls:

The Mixer Controls.

1. The Meter shows the track’s RMS (average) and peak output level. While monitoring, how-

ever, it shows the input level.

2. The Volume control adjusts the track’s output level. With multiple tracks selected, adjusting

the volume of one of them will adjust the others as well.

3. The Pan control positions the track’s output in the stereo ﬁeld. To reset the Pan control to

center, click on its associated triangle. With multiple tracks selected, adjusting the pan

knob for one of them will adjust the others as well.

4. To mute the track’s output, turn off the Track Activator switch. With multiple tracks selected,

toggling one of their Track Activators will toggle the others as well.

5. The Solo switch solos the track by muting all other tracks, but can also be used for cueing

(page 202). With multiple tracks selected, pressing any of their Solo switches will solo all

of them. Otherwise, tracks can only be soloed one at a time unless the [CTRL](PC) / [CMD]

(Mac) modiﬁer is held down or the Exclusive Solo option in the Record/Warp/Launch

Preferences is deactivated.

5 6