Reference Manual

4 91 Using Push
Loading Devices or Device Presets in Browse Mode.
You can scroll quickly through folders and subfolders via Encoders 1, 3, and 5.
What you see when in Browse Mode depends on the device that was last selected. If you were
working with an instrument, Browse Mode will show you replacement instruments. If you were
working with an effect, you will see effects.
After pressing a device or preset load button, the button will turn amber. This indicates that the
currently selected entry is loaded; if you navigate to a different entry, the button will turn green
again. Tip: pressing an amber load button will load the next entry in the list, allowing you to
quickly try out presets or devices.
27.3 Playing and Programming Beats
To create beats using Push, first make sure Note Mode is enabled.
The Note Mode Button.