Reference Manual

509 Using Push
Use these buttons to access:
•additional banks of parameters (for effects that have more than one bank of parameters).
•additional device chains within Racks that contain more than one chain.
27.8 Mixing with Push
To control volumes, pans, or sends with the encoders for up to eight tracks simultaneously, press
the corresponding button on Push.
Volume and Pan & Send Buttons.
In Volume Mode, the encoders control track volume.
Pressing the Pan & Send button repeatedly will cycle between controlling pans and however
many sends are available in your Live Set.
Press Push’s Track button to enable Track Mode.
Track Button.