Instruction manual

ABM INTERNATIONAL, INC. IM-1215
AUTOPILOT Computerized Quilting System
Copyright March 2013 31 | P a g e
Installation Guide
Minimum System Requirements
o A Pentium Based Personnel Computer
o Microsoft Windows Operating System Version 7 or Newer
o 512MByte Ram
Step1: Run Install AutoPilot.EXE install file.
On the CD provided run the file Install AutoPilot.EXE. This will copy any necessary drivers and the AutoPilot
application “C:\Program Files (x86)\AUTOPILOT”.
Step2: Connect AutoPilot USB to a PC
Connect USB Cable provided between the AutoPilot box and the PC.
Step3: Installing the USB Driver
When the USB Cable is plugged into PC, windows will detect “New Hardware Found”. A popup box similar to
the following will be displayed. Select ‘No, not at this time and press next.
Select ‘No, not at this time and press next.