User's Manual

11
Status
In this screen, you can see the current settings and status of this Access Point. You
can change settings by selecting specific tab described in below.
System
System
Alias Name
You can assign a unique name to this Access
Point. The alias name is especially important
for identification when there are more than
one Access Point is applied in a network.
Uptime
The time period since the device was up.
Firmware Version
The current version of the firmware installed
in this device.
Wireless Configuration
Wireless Mode
There are four modes supported, Access
Point, Client (Ad-hoc and Infrastructure),
and Bridge. The default mode is Access
Point. If you want to change to bridge
mode, please go to Wireless/WDS Setting
to enable the WDS function.
SSID
The SSID differentiates one WLAN from
another, therefore, all access points and all
devices attempting to connect to a specific