User's Manual

Network Type:

When in Client mode, you can select

between Ad-Hoc and Infrastructure.

SSID: The SSID differentiates one WLAN from

another, therefore, all access points and all

devices attempting to connect to a specific

WLAN must use the same SSID. It is case-

sensitive and must not exceed 32 characters.

A device will not be permitted to join the

BSS unless it can provide the unique SSID.

An SSID is also referred to as a network

name because essentially it is a name that

identifies a wireless network.

Channel Number: Allow user to set the channel manually or

automatically.

If set channel manually, just select the

channel you want to specify.

If “Auto” is selected, user can set the

channel range to have Wireless Access Point

automatically survey and choose the channel

with best situation for communication.

The number of channels supported depends

on the region of this Access Point. All

stations communicating with the Access

Point must use the same channel.

From Channel:  To Channel:  When select “Auto” in “Channel Number,

you have to set a range of channels for the

Access Point to automatically survey and

choose the channel for optimal performance.

Allowed Clients

Enter a number ranging from 1 to 64.

Apply Change

Press to save the new settings on the screen.

Reset

Press to discard the data you have entered

since last time you press Apply Change.

Advanced Settings

It is not recommended that settings in this page to be changed unless advanced users want

to change to meet their wireless environment for optimal performance