User's Manual

21
Set WEP key
 Click the Set WEP Keys will prompt you a
window to set 64bit or 128bit Encryption.
 Select HEX if you are using hexadecimal
numbers (0-9, or A-F). Select ASCII if you are
using ASCII characters (case-sensitive).
 Ten hexadecimal digits or five ASCII
characters are needed if 64-bit WEP is used;
26 hexadecimal digits or 13 ASCII characters
are needed if 128-bit WEP is used.
Use 802.1x
Authentication
 If Use 802.1x is selected, then the Set WEP
Key won’t be usable.
 If Use 802.1x is selected, the Enable RADIUS
Client will be automatically selected too.

If Use 802.1x is selected and “WEP” is selected
in Encryption field, then the authentication
mechanism to the RADIUS Server will be TTLS.
Encryption : WPA
WPA: If WPA is selected, users will have to select the Authentication modes between
WPA-RADIUS and Pre-shared Key, both modes need to have TKIP selected. (AES is
not functional at present.)
.
Pre-shared Key
Pre-Shared-Key serves as a password. Users may key in a 1
to 63 characters string to set the password or leave it blank, in