User's Manual

 Enable Wireless Access

Control

Check the checkbox to enable this function.

MAC Address

Enter the MAC Address of a station that is allowed to access

this Access Point.

Comment

You may enter up to 20 characters as a remark to the

previous MAC Address.

Apply Change

Press to save the new settings on the screen.

Reset

Press to discard the data you have entered since last time

you press Apply Change.

Delete Selected

To delete clients from access to this Access Point, you may

firstly check the Select checkbox next to the MAC address

and Comments, and press Delete Selected.

Delete All

To delete all the clients from access to this Access Point,

just press Delete All without selecting the checkbox.

Reset

If you have made any selection, press Reset will clear all the

select mark.

Site Survey

Site survey displays all the active Access Points and IBSS in the neighborhood. When you

are in the client mode, you can select one AP to associate.

Press Refresh to get the latest information.