User's Manual

27
802.1d
Spanning Tree
To enable 802.1d Spanning Tree will prevent the network
from infinite loops. Infinite loop will happen in the network
when WDS is enabled and there are multiple active paths
between stations.
Clone MAC Address
You can specify the MAC address of your Access
Point to replace the factory setting.
Web Server Port:
The web server provides the configuration service to
manage this Access Point. Generally the web server
port is set to 80. You can change it in this field.
Apply Change
Press to save the new settings on the screen.
Reset
Press to discard the data you have entered since last time
you press Apply Change.
Web Redirection