User's Manual

HARDWARE CON NECT ION

Note: Before you starting hardware connection, you are advised to find an appropriate

location to place the Access Point. Usually, the best place for the Access Point is at the

center of your wireless network, with line of straight to all your wireless stations. Also,

remember to adjust the antenna; usually the higher the antenna is placed, the better will

be the performance.

1. Connect to your local area network: connect an Ethernet cable to the Ethernet

port of this Wireless Access Point, and the other end to a hub, switch, router, or

another wireless access point.

2. Power on the device: connect the included AC power adapter to the Wireless Access

Point’s power port and the other end to a wall outlet.

3. Configure your PC: Make sure your local PC(s) has wireless network adapter

installed.