User's Manual

19
Admin (Administration)
In this Administration page, you can
Change password.
The device has no password at default. It is recommended that you set a
password to ensure that no one can adjust the device’s settings;
Reboot/Reset this device.
By Reboot, the device will re-boot itself and while still keep your
original settings. You will probably do this if problems occur with this
Access Point.
By Reset, the device will reset itself to the factory default settings.
(Note that all your original settings will be replaced by factory
default settings.)
Upgrade system firmware.
To set/change password:
1. Enter your password to the first password box.
2. Enter the password again in the next box to confirm.
3. Click SAVE to save the setting.
To upgrade system firmware,
1. You will have to download the file to your computer.
2. Enter the file name and path in the field next to the Browse button. Or
you can click Browse to find the file you previously downloaded.
3. Click the Upload button to start upgrading. Wait for about 1 minute for
the upgrade.
4. When the firmware upgrade is complete, remember to reboot the
device.